Sauna Electrical Specifications | Good Health Saunas

Good Health Saunas Electrical Information

Typical Electrical Requirements for Infrared Saunas

Good Health infrared saunas use 110-volt power and require a dedicated 15-amp or 20-amp circuit, depending on the model. A dedicated circuit powers only the sauna, reducing the risk of an overloaded circuit or tripped breaker during use. Before installation, confirm your model’s amperage, outlet style and wiring requirements. Most homes already have standard 15-amp outlets, while larger infrared sauna models may require a 20-amp outlet installed by a licensed electrician.

Typical sauna power requirements include:

  • 110-volt electrical service
  • A dedicated 15-amp or 20-amp circuit
  • A compatible grounded outlet
  • 12-gauge wiring for a new 20-amp circuit
  • No other devices or appliances on the sauna circuit
  • Professional electrical installation when a new outlet or circuit is needed

Local codes can vary. Consult a licensed electrician before adding or modifying electrical service in your home.

Good Health Saunas Power Cord and Outlet Placement

The power cord exits through the roof of each Good Health Sauna and measures approximately 10 feet, although the exact length varies by model. The cord can drape behind the cabin to reach a standard-height wall outlet. When installing a new outlet, placing it higher on the wall can keep the cord organized behind the sauna. Face the front of the cabin when planning placement. The cord exits from the left side of the roof on most models. The GSE-3C has a different cord position due to its corner configuration.

   Before delivery or assembly:

  • Confirm the cord location for your selected model
  • Place the outlet within reach of the power cord
  • Keep the outlet accessible for maintenance
  • Avoid pinching the cord between the sauna and wall
  • Leave enough clearance to connect or disconnect power safely

Do not use an extension cord, power strip or outlet adapter for regular operation.

Good Health Saunas Electrical Specifications by Model

Review the required amperage and outlet type before installing your sauna. Every model listed below requires a dedicated 110-volt outlet.

Series Model Amperage Voltage Dedicated
Outlet Required
SignatureGSE-115 amp110 voltYes
SignatureGE-215 amp110 voltYes
SignatureGSE-220 amp110 voltYes
SignatureGSE-320 amp110 voltYes
SignatureGSE-3C20 amp110 voltYes
SignatureGSE-420 amp110 voltYes
Hybrid2-Person Hybrid20 amp110 voltYes
Hybrid3-Person Hybrid20 amp110 voltYes
Hybrid3-Person Corner Hybrid20 amp110 voltYes

A standard 15-amp outlet has two vertical slots. A 20-amp outlet includes a T-shaped slot and requires 12-gauge wiring. Hire a licensed electrician to install a new 20-amp circuit or confirm an existing outlet meets the sauna’s requirements.

How to Prepare Your Electrical Setup Before Installation

Installing the correct outlet before delivery creates a smoother setup process and allows the sauna to be tested as soon as assembly is complete. Start by selecting your sauna model and confirming its power requirements. Recommended preparation steps include:

  • Choose the sauna’s permanent location
  • Confirm the model’s voltage and amperage
  • Identify the roof cord location
  • Measure the distance between the sauna and outlet
  • Install a dedicated circuit when required
  • Verify the outlet style matches the sauna plug
  • Keep the circuit free from other appliances
  • Complete electrical work before the scheduled installation date

The sauna should sit on a flat, stable surface with enough room around the cabin for assembly and access. Good Health Saunas models include plastic feet, allowing installers or homeowners to carefully reposition the unit on many flooring surfaces.

Can You Install the Sauna Before the Outlet Is Ready?

Yes. A Good Health Sauna can be assembled before the permanent outlet is installed. The cabin can remain unplugged until a licensed electrician completes the proper electrical setup. If Good Health Saunas delivers and installs your unit, the installation team may use an adapter to test a 20-amp model when the permanent 20-amp outlet is not yet available. The adapter is intended for installation testing, not routine sauna operation. Complete the permanent electrical work before regular use. Never operate the sauna long-term from an extension cord, power strip or temporary adapter.

Electrical Safety and Installation Considerations

Proper electrical preparation protects the sauna, your home’s wiring and everyone using the cabin. Follow the owner’s manual and all local electrical codes. Important safety practices include:

  • Connect the sauna to a grounded outlet
  • Use a dedicated circuit with the correct amperage
  • Keep liquids away from the outlet and power cord
  • Never alter the sauna plug
  • Do not use extension cords or power strips
  • Keep the cord free from pinching, sharp bends and heat damage
  • Turn off power before inspecting electrical components
  • Hire a licensed electrician for new wiring or circuit changes

Stop using the sauna and contact Good Health Saunas if the breaker repeatedly trips, the outlet feels unusually warm or the cord shows visible damage.

HybridHeat Electric Infrared Sauna Heaters

Good Health Saunas developed HybridHeat technology to combine broad carbon heating panels with concentrated high-end ceramic heaters. The electric heating system distributes infrared warmth throughout the cabin while operating from the model’s specified 110-volt circuit. Good Health Saunas also uses ultra-low EMF technology and third-party testing to evaluate key performance and safety characteristics. Electrical requirements vary by cabin size, so confirm the model specifications before preparing your outlet.

Compare Sauna Power Requirements Before Buying

When comparing infrared saunas, review more than cabin size and heating features. Outlet type, amperage, circuit availability and installation location can affect which model fits your home. A 15-amp model may connect to a familiar outlet style, although it still requires a dedicated circuit. Larger models commonly use a dedicated 20-amp outlet. Confirming your electrical setup early can help you select a sauna suited to your room and avoid unexpected installation work.

For more information about electrical requirements, call Good Health Saunas at (888) 997-2862.

Good Health Saunas Events Near You

All Events

Get the Latest on Events & Exclusive Offers

  • This field is for validation purposes and should be left unchanged.